Elsys ELT-1

New product

ELT-1 is general LoRaWAN devices for measuring analogue or digital signals. ELT-1 can for example be used together with electricity meters, flow meters, analogue sensors, moisture sensors, temperature sensors, water leak cable or ultrasonic distance sensors. Device is enclosed in an IP65 box and are designed to be outside.

More details

    Weight: 0.2 kg
    Width: 5.9 cm
    Height: 5.4 cm
    Depth: 3.5 cm

    Inside the ELT-1 you will find three internal sensors: a temperature sensor, a humidity sensor and an accelerometer for orientation measurements.

    They are powered by a 3,6V AA lithium battery.

    The Battery life is estimated to be up to 10 years but depends on sample interval, transmit interval, data rate, power output and environmental factors.

    All Elsys sensors are equipped with NFC (Near Field Communication) for easy configuration with an Android phone. With  “Sensor Settings“ application, you can change sample rate, data rate, encryption keys, triggers, activation and much more. All of our sensors are built on the LoRaWAN stack from Semtech. Channel planes exists for US902-928, EU863-870, AS923, AU915-928, KR920-923.

    Key Features

    • Analog 0-10V in
    • Digital in
    • Pulse counter
    • Direct connection to S0 outputs
    • Direct connection to Decagon moisture sensors
    • Direct connection to external temperature sensor
    • Water leak sensor input
    • Direct connection to distance sensor (ultrasonic)
    • Embedded sensors for temperature, humidity, acceleration.
    • Embedded atmospheric pressure sensor (ELT-2-HP)
    • NFC for easy configuration
    • Size: 94 x 59 x 35 mm
    • Output power: +14dBm (ELT-1), +20dBm (ELT-2-HP)
    • Approx. range: 8km (ELT-1), 12km (ELT-2-HP)*
    • Battery life: 10 years**
    • Custom SW possible
    • 3.6V AA lithium battery
    • US902-928, EU863-870,AS923,AU915-928,KR920-923

22 other products in the same category: